14" x 4.5" Wide Chisel for Hilti Style 7/8" Hex Shank

14″ × 4.5″ Wide Chisel – Hilti-Style 7⁄8″ Hex Shank

Built for high-output removal work in heavy demolition and flooring applications, this 4.5″-wide chisel (14″ overall length) with a 7⁄8″ hex (Hilti-style) shank delivers maximum surface coverage and power transfer. Designed to fit Hilti TE-S style hammer systems (800/805/905/1000/1500/2000 series). 

Key Features:

• Full compatibility – Specifically manufactured to fit tools with a 7/8″ hex shank (Hilti TE-S series including TE800, TE805, TE905, TE1000, TE1500, TE2000).

• True 4.5″ wide cutting face – Offers broad coverage for rapid removal of concrete, tile, thin-set, mortar, or adhesive layers, reducing time and labor per pass.

• 14″ overall length – Provides excellent reach and control, while still being manageable for on-site use in flooring, slab removal, or large-area surface prep.

• Durable steel construction – Made of hardened/tempered alloy steel to withstand the high-impact stresses typical of demo work.

• Versatile use case – Ideal for flooring contractors, rental operations, restoration crews, or any pro needing a dependable “jumbo width” chisel fit for Hilti TE-S style systems.

Why Choose This Chisel?
When you’re tackling large surface area removal—whether it’s removing floor slabs, stripping tile and thin-set, or breaking out large chunks of concrete—narrow chisels just won’t cut it. The 4.5″ width means you move more material with each strike, translate into fewer passes, less fatigue, and greater productivity. Backed by part of the trusted Champion Chisel Works line, this tool is engineered by professionals who understand job-site demands.

Usage Tips:

• Before use, ensure your hammer’s chuck and shank interface are clean, debris-free, and properly secured—this ensures correct seating of the hex shank and prevents slippage.

• Use steady, controlled motion; the wider chisel face gives better coverage but also demands good tool control to maintain efficient contact and avoid bounce.

• After heavy use, inspect the chisel edge and shank for wear or deformation—when the edge rounds off or the shank gets distorted, the tool no longer performs at peak.

• Store in a dry place and inspect for rust, damage or nicks. Keeping the shank and cutting face in good condition will extend tool life.

Specifications at a Glance:

• Width: 4.5″

• Length: 14″ overall

• Shank: 7⁄8″ hex (Hilti TE-S style)

• Designed for: Heavy-duty demolition/ flooring removal hammers (Hilti TE-S style)

• Brand: Champion Chisel Works

• Ideal for: Large surface removal, slab removal, tile/adhesive stripping, broad-area demolition