Hex/Notch Heavy Duty Floor Scraper System: 1-1/8 Hex Notch Floor Scraper Built for Demolition Hammers
The Hex/Notch Heavy Duty Floor Scraper System is engineered for professional contractors who need maximum scraping power when removing bonded flooring materials from concrete. When searching for a 1-1/8 hex notch floor scraper, contractors are typically working with large demolition hammers or hammer cart systems and need a tool that can handle continuous high-impact use without loosening, bending, or failing.
The Champion Chisel hex notch floor scraper is specifically designed for this level of work, making it a reliable solution for commercial, industrial, and large-scale floor removal projects.
A 1-1/8 hex notch floor scraper refers to the shank configuration used to connect the scraper system to a demolition hammer. The shank measures 1-1/8 inches across the flats and includes a retaining notch that locks securely into compatible demolition hammers. This hex notch interface is critical for heavy scraping applications because it prevents rotation and pull-out during operation. When scraping thin-set mortar, mastic, carpet glue, or other aggressive floor coverings, the forces applied to the tool are significant, and a secure shank connection is essential for both performance and safety.
The Champion Chisel 21" Long Heavy Duty Floor Scraper System for 1-1/8 Hex Notch Shank is designed to meet these demands. This heavy duty floor scraper system for demolition hammer use is built to convert the hammer’s vertical impact energy into efficient horizontal scraping force across the concrete surface. The extended 21-inch overall length provides improved reach, allowing operators to cover more area with less bending and reduced fatigue, especially when working on large commercial floors such as warehouses, retail spaces, factories, and institutional buildings.
One of the defining features of the Champion Chisel hex notch floor scraper is its wide, hardened steel blade. The scraper blade measures approximately 6 inches wide and is manufactured from 2 mm thick hardened steel. This blade width allows for fast material removal while maintaining durability under constant vibration and impact. Unlike thinner or light-duty scraper blades, this hardened steel blade resists deformation and premature wear, even when used on stubborn adhesives or thick thin-set mortar.
This system is built as a two-piece assembly, which is an important advantage in heavy-duty applications. The two-piece design allows the scraper blade to be properly oriented, particularly when the system is used with a hammer cart. Proper blade orientation ensures consistent scraping angles and reduces uneven wear on the blade edge. It also simplifies maintenance, as the blade can be removed and replaced without replacing the entire scraper body and shank. Contractors searching for a hex notch floor scraper replacement blade benefit from this design, since replacing only the worn blade lowers long-term operating costs and keeps equipment in service longer.
The heavy duty floor scraper system demolition hammer users rely on must be compatible with high-powered electric demolition hammers designed for hex notch tooling. The Champion Chisel 1-1/8 hex notch heavy duty floor scraper system is intended for use with large demolition hammers that deliver sufficient impact energy to drive the scraper through bonded materials. It is suitable for both handheld operation and hammer cart setups, making it versatile across different jobsite configurations. In hammer cart applications, the scraper system allows operators to maintain consistent pressure and angle while covering large areas efficiently.
Typical applications for the Champion Chisel hex notch floor scraper include removing thin-set mortar after tile removal, stripping mastic and carpet glue from concrete floors, and preparing concrete surfaces for new flooring installation. These tasks are common in commercial renovation, retail turnover, warehouse refits, and industrial maintenance projects. The rugged construction of the system allows it to be used continuously in demanding environments without frequent downtime.
Operational guidance is an important consideration when using a 1-1/8 hex notch floor scraper. Contractors should confirm that their demolition hammer is designed to accept 1-1/8 inch hex notch tooling before installation. The hammer should provide adequate impact power to drive the scraper efficiently without forcing or prying, which can damage the blade or system components. Proper personal protective equipment, including hearing protection, safety glasses, gloves, and dust control measures, should always be used. During operation, maintaining the correct scraping angle and avoiding twisting motions helps extend blade life and prevents unnecessary stress on the scraper body.
Routine inspection and maintenance are also key to getting the most out of a heavy duty floor scraper system. Blade bolts and hardware should be checked regularly for tightness due to vibration during use. Worn or dulled blades should be replaced promptly to maintain scraping efficiency and reduce operator strain. Champion Chisel offers hex notch floor scraper replacement blades and hardware so contractors can service their equipment quickly and keep projects moving.
Champion Chisel Works designs its heavy duty floor scraper systems with professional contractors in mind. Every component is engineered for strength, serviceability, and long tool life. The use of a proven 1-1/8 hex notch interface ensures compatibility with heavy demolition hammers commonly used in commercial and industrial applications. The combination of extended length, wide hardened blade, and two-piece construction delivers a balance of performance, versatility, and durability that contractors expect from a professional-grade scraper system.
For contractors looking for a reliable Hex/Notch Heavy Duty Floor Scraper System, the Champion Chisel 21" Long Heavy Duty Floor Scraper System for 1-1/8 Hex Notch Shank provides a purpose-built solution. It is designed to handle the toughest floor removal jobs while offering replaceable components and long-term value.
Questions about compatibility, replacement blades, or selecting the correct scraper system for a specific demolition hammer can be answered by contacting Champion Chisel Works directly at 800-239-1434 or by visiting https://championchisel.com/ to view full product specifications and availability.